MCT ENGINEERED SYSTEM
Bituminous waterproofing coating
Multi-coat bitumen-emulsion waterproofing/protective system
CONDITIONS
Start with the site
Multi-coat bitumen-emulsion waterproofing/protective system · Concrete | source-supported steel · Exterior | below-grade | damp exposure
Use only the substrates and applications stated in the current TDS.
MCT / STAGES
System stages
See each stage in context, understand its technical role and open the relevant MCT product data directly.
APPLICATION SEQUENCE
Select a stage. Follow its role to the product and technical data.
Surface preparation
Clean dirt, loose particles and oil; steel rust-free
Dilute Deck Seal W.B 10–30% with water to close porosity
Apply by brush or spray
Apply after first coat has dried; at least two coats recommended
MCT / PRODUCT ROLES
MCT products in this system
MCT / TDS
Technical data
APPLICATIONS
Explore application environments
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.