Tile Fixing / STAGES
Cementitious tile fixing
Cementitious tile adhesive installation on porous mineral substrates
Miscellaneous
MC-Tile Weld
Adhesive Mortar and Grouting for floor tiling
MC – Tile Weld is sand – cement based powder blended with special balaced additives and modified with synthetic resins , ready to use after mixing with water .
Description
MC-Tile Weld is a sand-cement-based powder blended with balanced additives and modified with synthetic resins, ready for use after mixing with water.
Where to use
Tile fixing for external and internal floors and walls. Plaster-board fixing without preparation, as stated by the source. Ceramic and mosaic applications.
Advantages
Quick setting by thin-bed method. Strong adhesion. No tile sag. Water-resistant; source states suitability for swimming pools. Easy to use.
Technical data
Color Gray Density 1.6 g/cm³ Working time 30-40 min Available time for adjusting tiles 10-15 min Mixing 25 kg powder : 8 ± 0.5 L water Consumption for tiling Approx. 1.1-1.5 kg/m² Consumption for grouting 600 g/m² (20 x 20 cm tiles & 0.6 x 0.6 cm joints) Shelf life 12 months under dry storage in closed bags Packaging 25 kg paper bags
Mixing
Mix MC-Tile Weld with water at the rrecommended mixing ratio and stir thoroughly to obtain the required tiling-mortar consistency.
Application
Use a special notched steel trowel with interchangeable blades. Apply an even layer of MC-Tile Weld with the flat edge of the trowel, then progressively rib the layer with the notched edge. Apply tiles while the ribs are still wet and tacky to secure maximum bond strength.
Surface preparation
The surface to be tiled should be flat, thoroughly clean and free from grease, dirt, dust and unsound material. The source states that MC-Tile Weld should not be used directly on non-porous surfaces such as painted concrete, plastics, metals or wood.
Storage & packaging
Shelf life: 12 months under dry storage conditions in closed bags. Packaging: 25 kg paper bags.
MCT / SYSTEMS
Where it fits
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.