Concrete Admixtures

MC-Super 43

Concrete Super plasticizer and Set Retarder

MC-Super 43 is a concrete Super plasticizer and retarder based on the modified naphthalene sulphonate.

Key technical properties
AppearanceClear brown liquid
Specific gravity @ 25°C1.15 g/cm³
Chloride contentNil
Air entrainment< 1%
pH7 ± 1
Shelf life18 months under suitable storage conditions in closed drums or tanks.
Packaging210 L drums and large-capacity tanks.
Addition rate1000 ± 250 ml / 100 kg cement

Description

MC-Super 43 is a concrete superplasticizer and retarder based on modified naphthalene sulphonate.

Where to use

Recommended where initial retardation of setting is required or desired. Improves performance in prestressed, precast and flowing-concrete applications. May be used with air-entraining cements and air-entraining admixtures where air-entrained concrete is specified or desired. When used with another admixture, each admixture must be dispensed separately into the mix.

Standards / source references

ASTM C-494 Type G · BS 5075

Advantages

• Improves workability without increasing mixing water. • Helps place heavily reinforced sections with reduced risk of honeycombing. • Allows reduction of mixing water while maintaining workability. • Retards initial setting, extending working time and improving concrete uniformity. • Promotes early strength development. • Increases compressive and flexural strength. • Improves resistance to surrounding and weather conditions.

Dosage / method

MC-Super 43 may be added directly to the mixing water before it enters the mixer, or separately to freshly mixed concrete. Use at 1000 ± 250 ml per 100 kg of cement. Determine the optimum dosage by trials using the same materials intended for use.

Cleaning

Clean tools and equipment with water.

Compatibility

Compatible with all types of Portland cement. Compatible with other MC-Admix products; each admixture must be added separately.

Storage / shelf life

18 months under suitable storage conditions in closed drums or tanks.

Safety

Non-toxic and nonflammable according to the approved source. Wash skin contamination with water. Standards ASTM C-494 Type G · BS 5075

Packaging

210 L drums and large-capacity tanks.

PROJECT / NEXT STEP

Bring us the condition on site.

Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.

Ask an Engineer