Grouting / STAGES
Non-shrink cementitious baseplate / bolt grouting
Cementitious precision grouting for baseplates, bolts, equipment and structural bearing zones
Non Shrink Grout & Repair Materials
MC-Grout
Ready –to-use, non-shrink grout, natural in color, flowable, high strength, meets non shrink requirements of CRD-C588-76 and CRD 621
MC-Grout is specially prepared , ready –to- use , non shrink high strength grout . it is from flowable to damp pack for precision of grouting of equipment, concrete systems structural building members, curtain walls , precast wall panels, beams and columns . It contains natural aggregates and provides a grout that is similar in appearance to concrete and mortar M C - Grout is the ideal product to use for a natural colored grout .
| Colour | Grey |
|---|---|
| Bulk density | 1.4-1.5 kg/L |
| Shelf life | 12 months |
| Expansion | < 0.4% after 28 days |
| Mixing water per 25 kg bag | 4 L ± 10% |
| Approximate yield | 14.00 L per 25 kg |
| Compressive strength - 1 day | 200 kg/cm² |
|---|---|
| Compressive strength - 3 days | 350 kg/cm² |
| Compressive strength - 7 days | 500 kg/cm² |
| Compressive strength - 28 days | 600 kg/cm² |
Description
MC-Grout is a ready-to-use, non-shrink, high-strength grout for precision grouting from flowable to damp-pack consistency. It contains natural aggregate and provides an appearance similar to concrete and mortar.
Where to use
Precision grouting beneath equipment, baseplates, soleplates and columns. Applications where shrinkage must be eliminated and high-strength grout similar in appearance to concrete or mortar is required. Non-shrink grouting of precast wall panels, beams and columns.
Advantages
Hardens without bleeding, settlement or drying shrinkage when mixed and placed at the appropriate consistency. Retains workable consistency under warm conditions as described in the source. Can be pumped into intricate or difficult-to-access areas. Provides a dense grout without gas-generating or air-release agents such as aluminium powder. Develops high strength at flowable consistency. Natural aggregate provides a concrete-like appearance.
Strength development & product data
Compressive strength - 1 day 200 kg/cm² Compressive strength - 3 days 350 kg/cm² Compressive strength - 7 days 500 kg/cm² Compressive strength - 28 days 600 kg/cm²
General precautions
The source specifies a grout and contact-surface temperature range of approximately 7-40°C. Do not add water in an amount that causes bleeding or segregation. Outside the recommended temperature range, apply appropriate high- or low-temperature grouting procedures.
Packaging & references
Packed in 25 kg moisture-resistant bags. MC-Grout S.R is also identified by the source for conditions requiring sulphate-resistant grout. CRD-C588-76 CRD-C 621 Flow reference: ASTM C230 - 5 drops in 3 seconds at 95% flow, as stated by the source.
MCT / SYSTEMS
Where it fits
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.