Epoxies & Protective Coating
MC-Epo Point
Epoxy Pointing Mortar
MC- Epo Point is a solvent free three component system based on epoxy resin, amine hardener and specially selected aggregates .
| Colour | Brown |
|---|---|
| Tensile strength | > 5 N/mm² - ASTM C307 |
| Bond strength | > 1.5 N/mm² - ASTM C321 |
| Water absorption | < 0.3% - ASTM C413 |
| Linear shrinkage | < 0.5% - ASTM C531 |
| Compressive strength | 67 ± 2 N/mm² - ASTM C579 |
| Specific gravity @ 25°C | 1.83 g/cm³ |
| Consumption | 185-200 g per 1 cm x 1 cm x 1 m |
| Shelf life | 12 months under suitable storage conditions |
| Packaging | 40 kg: 4 kg resin + 2.7 kg hardener + 33.3 kg filler |
| Pot life @ 20°C | 2 hours |
Description
MC-Epo Point is a solvent-free three-component epoxy mortar comprising epoxy resin, amine hardener and specially selected filler.
Where to use
Pointing mortar for blue bricks and tiles lining wastewater tunnels. Manholes, sewage plants and related wastewater structures.
Advantages
Pre-measured packaging. Non-sag; suitable for horizontal and vertical application. Resistant to wastewater, dilute acids and alkalis according to the approved source. Can be applied on dry or damp surfaces. No primer is required according to the approved source. Long pot life.
Surface preparation
The surface to be pointed must be clean, sound and free from oil or greasy contamination. The approved source states that a primer coat is not required.
Mixing
Thoroughly mix the resin component with the hardener using a low-speed mechanical mixer until homogeneous. Add the filler gradually while mixing until a uniform colour and consistency are obtained.
Application
Fill the joints using a hand gun, pointing trowel, spatula or other suitable pointing tool.
Cleaning
Clean tools and equipment with MC-Thinner 02 before the material hardens.
Packaging
40 kg: 4 kg resin + 2.7 kg hardener + 33.3 kg filler.
Safety
Prevent material from entering the eyes and avoid direct skin contact. Work in well-ventilated areas. Keep away from flame and sparks when solvents are being used.
Storage / shelf life
Shelf life is 12 months when stored under suitable conditions.
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.