Non Shrink Grout & Repair Materials
MC-Epo Patch F
Epoxy Paste
MC-Epo Patch F is a two component 100% reactive epoxy paste , Due to its high compressive strength, M C - Epo Patch F has an excellent resistance to impact and dynamic loads . It has a non shrink property and a high bond strength to concrete and steel .
| Density | 1.7 g/cm³ |
|---|---|
| Approved mix ratio A:B | 3:2 by weight |
| Consistency | Paste |
| Colour | White / grey |
| Pot life @ 25°C | 45-60 minutes |
| Final cure @ 25°C | 7 days |
| Compressive strength @ 25°C | > 600 kg/cm² |
| Shelf life | 12 months at 25°C in closed containers |
| Packaging | 5 kg: 3 kg resin + 2 kg hardener |
Description
MC-Epo Patch F is a two-component, 100% reactive epoxy paste. Its high compressive strength provides resistance to impact and dynamic loads, while the non-shrink formulation provides high bond strength to concrete and steel.
Where to use
Repair of floors exposed to high abrasion and wear. Patching cracks and filling joints or voids in concrete, timber, steel, ceramic, marble and granite surfaces. Repair of structural elements subjected to high loads. Smoothing rough surfaces. Bonding marble, granite and ceramic tiles to concrete and steel substrates.
Advantages
Easy mixing and application. High compressive, tensile and bond strength. Fast curing. High resistance to acids, alkalis, salt solutions and other corrosive chemical solutions. Provides a smooth, water-resistant surface suitable for leveling and joint filling.
Surface preparation
New concrete: preferably allow at least 28 days before application; the surface must be clean, sound and suitably roughened for adhesion. Existing concrete: remove weak material back to sound concrete and clean away oils, grease, old coatings and dust. Steel: remove rust and contaminants; abrasive blasting is preferred to create a suitable bonding profile. For tile, marble or granite joints, remove dust and leave the joint dry before applying the paste.
Mixing & application
Mix both components with a slow-speed mechanical mixer for at least 3 minutes until fully homogeneous. Apply with suitable tools such as a trowel or knife for bonding, leveling, crack filling or joint filling.
Safety & cleaning
Prevent material from entering the eyes. Avoid prolonged or direct skin contact. Clean tools immediately after use with a suitable epoxy thinner before the material hardens.
Storage & packaging
Shelf life: 12 months at 25°C in tightly closed containers. Packaging: 5 kg total - 3 kg resin + 2 kg hardener. Mix ratio A:B = 3:2 by weight.
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.