Epoxies & Protective Coating
MC-Epo Paint 21
Epoxy Protective Coating
MC-Epo Paint 21 is a two component protective coating based on epoxy resin. It can be applied to all types of materials used in the building industry i.e. concrete, masonry, metal, wood, etc.
| Colour | Coloured |
|---|---|
| Specific gravity @ 25°C | 1.50 ± 0.05 g/cm³ |
| Solids by volume | 60% ± 2 |
| Pot life @ 25°C | 2 hours |
| Dust-free time | 3-4 hours |
| Minimum application temperature | 5°C |
| Consumption | 250 g/m² at 100 µm |
| Mixing ratio | 5 parts coloured resin : 1 part clear hardener by weight |
| Shelf life | 1 year under good storage conditions |
| Packaging | 6 kg: 5 kg base + 1 kg hardener |
Description
MC-Epo Paint 21 is a two-component protective coating based on epoxy resin. The approved source states that it can be applied to concrete, masonry, metal, wood and other building materials.
Where to use
Protective coating for floors and walls exposed to weather and abrasion. Workshops, garages and boiler rooms. Laboratories, laundries and metallic sheets. The approved source states suitability for contact with foodstuffs and oil-collecting tanks.
Where to use
Protective coating for floors and walls exposed to weather and abrasion. Workshops, garages and boiler rooms. Laboratories, laundries and metallic sheets. The approved source states suitability for contact with foodstuffs and oil-collecting tanks.
Advantages
Protective coating against weather and abrasion. High abrasion resistance. Resistance to dilute acids and alkalis. Protects metal surfaces against corrosion under severe conditions.
Surface preparation
The surface must be free from dust, grease and loose particles. Metal surfaces must be free from rust.
Mixing
Mix according to the stated ratio. Prepare only the quantity that can be applied within approximately two hours at 25°C.
Application
Apply by brush, roller or airless spray equipment.
Safety
Prevent material from entering the eyes. Avoid skin contact. Provide adequate ventilation. Keep away from sparks and flames where solvent-containing materials are involved.
Storage / shelf life
1 year under good storage conditions.
Packaging
6 kg: 5 kg base + 1 kg hardener.
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.